S10 Engine Rebuild - Final Adjustments!
S10 Engine Rebuild - Final Adjustments! In this video, I wrap up the final small details required to get the truck back on the road for good.
⚡ Tightening Torques & Specifications
| Component | Specified Torque | Assembly Notes |
|---|---|---|
| ~1 kgf·m (aproximado, citado de cabeça) | Author did not provide an exact torque value: 'Fiz o aperto aqui dos parafusinhos sem ignorância. Eu acho que eu usei o torquímetro, coloquei 1 kg, alguma coisa assim. Foi pouca coisa.' Low confidence due to author's own imprecision. |
Tools used
- Torque wrench
- Contact cleaner / spray degreaser (brake cleaner)
- Abrolock Blue medium-strength threadlocker
- Dremel (rotary tool)
Parts mentioned / replaced
- Inorganic coolant additive (green)
- Custom pulley spacer (M8 union nut drilled out, tapped to M6)
- Timing belt tensioner bolt
- New pulley bolts (grade 10.9, cold galvanizing) with spring/lock washer
- New valve cover, with cork gasket
- Mounting bracket (hose/cable support bracket)
- Push-mount cable tie (harness/hose routing clip)
- Spark plug wire organizing clips
- New radiator cap
- Clutch master cylinder and clutch slave cylinder
- Battery (reused from another vehicle, newer/stronger)
- Oil pressure sensor
- Oxygen sensor (lambda probe)