Engine Mounted in the Car - Endura Engine Rebuild - Episode 14.1
Reinstalling the Endura engine back into the car and securing the assembly to its mounts as a decisive step in the rebuild. It also lines up the engine inside the bay to prepare for cylinder head and peripheral assembly.
⚡ Tightening Torques & Specifications
| Component | Specified Torque | Assembly Notes |
|---|---|---|
| oil pump | 18 N·m | 1.8 kgf·m × 9.81 = 17.7 N·m |
| ignition coil bracket | 11 N·m | Declared value as 10.6 — unit not specified; likely N·m directly given the context (realistic value for coil bracket) |
| camshaft position sensor (CMP) | 10 N·m | 1.0 kgf·m × 9.81 = 9.8 N·m |
| crankshaft position sensor | 7 N·m | 0.7 kgf·m × 9.81 = 6.9 N·m |
| starter motor | 34 N·m | 3.5 kgf·m × 9.81 = 34.3 N·m |
Video chapters
- 00:00 Let's Get Started!
- 00:25 Installing the engine into the car
- 07:05 Reinstalling the water pump
- 10:55 Mounting the oil pump
- 11:33 Coil bracket and ignition coil
- 13:46 Camshaft and flywheel position sensors
- 15:53 Starter motor
Tools used
- hydraulic jack
- compressed air
- flathead screwdriver
- Low-Range Torque Wrench
- Medium-Range Torque Wrench
Parts mentioned / replaced
- oil pump
- oil filter
- starter motor
- fuel hose
- ignition coil