Installing Coolant Flange on Ka Manifold + Leak :( - [4K]
Continuing maintenance on the Ford Ka with an attempt to clean the coolant reservoir and install the cooling flange on the manifold. Also checks fuel injectors, discusses a leak found during the process, and shows accumulated dirt in the system
Tools used
- pipe hacksaw
- Rotary tool (Dremel)
- file
- 80-grit sandpaper
- 120-grit sandpaper
- 8 mm hex wrench
- thinner
Parts mentioned / replaced
- coolant flange (adapter)
- gasket (Bastos)
- high-temperature silicone (black)
- fuel injector O-rings
- fuel injector micro filters
- oil pressure switch (sender)
- water temperature sensor
- thread seal tape
- spring clamp
- Frontec cable ties
- vacuum hoses
- coolant reservoir