Applying Clearcoat - Painting the Brasilia's Engine Tins - Episode 4 - [4K]
Continuation of painting the engine tins on the Brasília, separating parts like the pulley and rear backing cover to receive the same 2K PU clearcoat finish. Much of the work goes into surface prep, wet sanding, and cleaning before moving on to primer, basecoat, and clearcoat.
Tools used
- 36 mm wrench (36mm)
- 3/4" drive socket (3/4 inch)
- bench vise
- 1200 grit sandpaper (1200 grit)
- abrasive sponge
Parts mentioned / replaced
- alternator pulley
- alternator backing plate / cover (outer)
- alternator backing plate / cover (inner)
- alternator ring / collar
- cylinder deflector tins (over-cylinder tins)
- 2K PU clearcoat (Lazzuril)
- primer surfacer (2K PU primer)
- Cadillac black basecoat
- alternator belt
- spring washer
- intake manifold