Cleaning Engine Block Threads - Endura Engine Rebuild - Episode 13.1
The Endura engine rebuild continues by cleaning the engine block threads before beginning assembly and installing mounts on the assembly. It also shows installing the battery tray, discusses bolt torque specs, and prepares the base for the next assembly stages
⚡ Tightening Torques & Specifications
| Component | Specified Torque | Assembly Notes |
|---|---|---|
| engine block lubrication gallery plug (oil gallery plug) | 18 N·m | Paulo cites '1.8 quilo' after consulting a Ford Australia forum and technical manual. Converted: 1.8 × 9.81 = 17.66 N·m. Tightening applied with mini torque wrench. |
Video chapters
- 00:00 Let's Get Started!
- 01:04 Cleaning threads in the engine bay to install motor mounts and brackets
- 01:43 Showing the "refurbished" engine bay
- 03:45 Checking the engine block before starting assembly
- 05:35 Oil gallery plug
- 07:25 Cleaning holes for bolt fitment
- 15:03 Cleaning oil pump mating surface
Tools used
- Low-range torque wrench
- caliper
- thread tap
- wire brush (thread cleaning brush)
- flathead screwdriver
- masking tape
Parts mentioned / replaced
- engine block oil gallery plug