Painting the Gol's Suspension Strut Towers - Part 1/2 - [4K]
Starting the painting of the Gol's suspension strut towers with a focus on preparation, cleaning, and surface finishing. Also turning a commonly overlooked area into something visually neater
Tools used
- masking tape
- airbrush / spray gun
- air compressor
- 320-grit wet sandpaper (320 grit)
- degreaser
Parts mentioned / replaced
- front suspension strut tower
- brake backing plate (dust shield)
- upper spring perch / spring cap
- wheel hub
- brake caliper
- wash primer / phosphating primer