Fixing a Rear Noise in the Gol
Investigates a rear noise in the VW Gol, searching for the source of the rattle in the suspension assembly and trim. Also documents the steps taken until locating or isolating the cause of the clunk.
📋 Quick Overview / Problem & Solution
Application: Volkswagen Gol, for diagnosis and service on the rear suspension shock absorber and bump stop.
Symptom / Problem: The video identifies a completely disintegrated suspension bump stop as the cause associated with the rear rattle.
Procedure & Result: The assembly is overhauled, the spring perch receives treatment against surface rust, and the final lower tightening is completed with the car on the ground.
⚡ Tightening Torques & Specifications
| Component | Specified Torque | Assembly Notes |
|---|---|---|
| rear shock absorber upper nut | 20 N·m | Correct torque stated in the video, but Paulo lacked the tool; applied manual tightening |
| rear shock absorber lower bolt/nut (final tightening with car on the ground) | 60 N·m | Final tightening performed with the full weight of the car on the shock absorber |
Tools used
- jack
- 15 mm open-end / combination wrench (15 mm)
- 6 mm Allen key (6 mm)
Parts mentioned / replaced
- rear suspension bump stop
- rear shock absorber dust boot / cover