Replacing Rear Axle Bushings - Ford Ka 1998 - [4K]
Replaces the rear twist beam axle bushings on a 1998 Ford Ka in a heavy suspension job. It also shows that, although laborious, this repair substantially improves vehicle handling
⚡ Tightening Torques & Specifications
| Component | Specified Torque | Assembly Notes |
|---|---|---|
| rear twist beam axle bracket bolts | 67 N·m | 6.8 kgf·m × 9.81 = 66.7 N·m → 67 N·m. |
| rear shock absorber bolt (lower axle mount) | 118 N·m | 12 kgf·m × 9.81 = 117.7 N·m → 118 N·m. |
Video chapters
- 0:00 Rear axle service and preparation
- 3:20 Accessing attachment points
- 6:20 Releasing the axle to remove bushings
- 9:30 Comparing old vs new parts
- 12:40 Preparing the bushing housing
- 15:50 Installation and final results
Tools used
- nut and bolt (19 mm nut / 15 mm bolt head)
- rubber mallet
- sledgehammer
- hydraulic jack
- jack stand
- threaded rod with washers and nut
- bearing press tool (puller/installer)
- flat file
- WD-40 / penetrating oil
- silicone spray
- abrasive sponge (240–280 grit)
- flathead screwdriver
Parts mentioned / replaced
- rear twist beam axle bushings