DIY! - Ford Ka Rear Shock Absorber Replacement - [4K]
Rear shock absorber replacement on a Ford Ka done at home, disassembling the assembly and replacing worn components. The video treats the maintenance as a relatively straightforward job while inspecting other rear suspension details
📋 Quick Overview / Problem & Solution
Application: Ford Ka, for rear shock absorber, bushing, mount, bump stop, and boot overhaul and replacement.
Symptom / Problem: The video guides visual inspection for leaks and play in the rear shock absorber bushing.
Procedure & Result: The rear assembly is disassembled, receives new components, and is reassembled onto the car.
⚡ Tightening Torques & Specifications
| Component | Specified Torque | Assembly Notes |
|---|---|---|
| rear torsion beam axle bushing | 67 N·m | Value read from technical manual. 6.8 kgf·m × 9.81 = 66.7 N·m. |
| rear shock absorber lower bolt | 118 N·m | Value read from technical manual. 12 kgf·m × 9.81 = 117.7 N·m. |
Video chapters
- 00:00 Let's get started
- 00:05 Visual inspection of shock absorbers, checking for leaks
- 01:05 Checking rear shock absorber bushing play
- 01:25 How to remove the rear shock absorber?
- 04:34 Bench testing and inspecting the shock absorber
- 05:10 Disassembling the shock absorber strut mount assembly
- 10:20 Ford Ka rear suspension exploded view
- 12:05 How to remove the rear shock absorber bushing?
- 13:57 Painting the rear axle beam
- 14:58 New rear suspension replacement parts
- 16:58 Old vs. new upper strut mount
- 19:32 How to assemble mount, bump stop, and boot on the rear shock?
- 23:30 How to install the rear shock absorber bushing?
- 26:57 How to mount the rear shock absorber onto the car?
- 31:20 Ford Ka rear suspension torque specifications
Tools used
- locking pliers
- coil spring compressor
- threaded rod with extractor tube
- hydraulic floor jack
- silicone spray
- 6 mm wrench (6 mm)
- 15 mm wrench (15 mm)
- flathead screwdriver
- jack
- jack stand
Parts mentioned / replaced
- gas-charged rear shock absorber
- dust boot, bump stop, and upper strut mount kit
- rear shock absorber bushing
- brake flexible hose